Wad Manager 1.7

Mod1:
* Folder support (10 levels deep)
* support
* Removed disclaimer prompt
* Sorg's enhancements are included

Mod2:
* Config file in sd:/wad/wm_config.txt
* Optional startup password. Very simple password using the D-Pads
* Optional startup path

Mod3:
* Config file contains additional params to automate the selection of IOS, Storage Device, and NAND Emulation
* WiiLight mod by mariomaniac33

Config file format:
; wm_config.txt resides in sd:/wad, and it is optional. You will get all the prompts if you don't have this file.
; The param keywords are case-sensitive at this point.
; No spaces precede the keyword on a line
; If you don't have a password in the config file, the default is no password
; If you don't have a startupPath, the default is /wad
; If you don't have any of the other parameters, it will prompt you for it
; To bypass any of the params, just comment out the line using a ";" at the beginning of the line
; Blank lines are ignored.
;
; Password=your_password (LRUD only, where L=left, R=right, U=up, D=down on the WiiMote or GC Controller, max 10 characters)
; StartupPath=startupPath (starting at the root dir "/"). Be sure that the path exists, else you will get an error.
;
Password=UDLRUD
StartupPath=/myWad

; Example of StartupPath at the root of the SD card
;StartupPath=/

; cIOS: 249, 222, whatever
cIOSVersion=249

; FatDevice: sd usb usb2 gcsda gcsdb
FatDevice=sd

; NANDDevice: Disable SD USB
; Note that WM will prompt for NAND device only if you selected cIOS=249
NANDDevice=Disable

I've done some testing with installing/uninstalling wads, but did nothing with the NAND stuff.
Mod2, Mod3 downloads contain a corresponding channel as well.

Downloads

Mod1: http://www.mediafire.com/file/jik3tmm0m4z/...er.wiiNinja.rar
Mod2: http://www.mediafire.com/file/h02dnn2udtj/...ja.Mod2.new.rar
Mod3: http://www.mediafire.com/file/zoztv2ti1md/...iNinja.Mod3.rar

Source

http://github.com/wiiNinja/Wad-Manager-wit...ory/tree/master

Nhấn để mở rộng...

+----------------------------+
| WAD Manager v1.5 |
| developed by Waninkoko |
+----------------------------+
| www.teknoconsolas.es |
+----------------------------+


[ DISCLAIMER ]:

- THIS APPLICATION COMES WITH NO WARRANTY AT ALL, NEITHER EXPRESS NOR IMPLIED.
I DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE IN YOUR WII CONSOLE
BECAUSE OF A IMPROPER USAGE OF THIS SOFTWARE.


[ DESCRIPTION ]:

- WAD Manager is an application that allows you to (un)install
WAD packages.

It lists all the available WAD packages in a storage device
so you can select which one to (un)install.


[ SUPPORTED DEVICES ]:

- SDGecko.
- Internal SD slot (with SDHC support).
- USB device (1.1 and 2.0).


[ HOW TO USE ]:

1. Create a folder called "wad" in the root of the storage device.
2. Copy all the WAD packages in the folder created in the step 1.
3. Run the application with any method to load homebrew.


[ NOTES ]:

- To use the NAND emulation is necessary to have a COMPLETE copy
of the NAND filesystem in the root of the FAT device.


[ KUDOS ]:

- Team Twiizers/devkitPRO
- svpe
- kwiirk
- All my betatesters.

Nhấn để mở rộng...

+----------------------------+
| WAD Manager v1.6 |
| developed by Waninkoko |
+----------------------------+
| TeknoConsolas | Magazine sobre videojuegos. Análisis, trucos y guÃ*as de PS3, Xbox 360, Wii, PSP, DS y PC |
+----------------------------+


[ DISCLAIMER ]:

- THIS APPLICATION COMES WITH NO WARRANTY AT ALL, NEITHER EXPRESS NOR IMPLIED.
I DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE IN YOUR WII CONSOLE
BECAUSE OF A IMPROPER USAGE OF THIS SOFTWARE.


[ DESCRIPTION ]:

- WAD Manager is an application that allows you to (un)install
WAD packages.

It lists all the available WAD packages in a storage device
so you can select which one to (un)install.


[ SUPPORTED DEVICES ]:

- SDGecko.
- Internal SD slot (with SDHC support).
- USB device (1.1 and 2.0).


[ HOW TO USE ]:

1. Create a folder called "wad" in the root of the storage device.
2. Copy all the WAD packages in the folder created in the step 1.
3. Run the application with any method to load homebrew.


[ NOTES ]:

- To use the NAND emulation is necessary to have a COMPLETE copy
of the NAND filesystem in the root of the FAT device.


[ KUDOS ]:

- Team Twiizers/devkitPRO
- svpe
- kwiirk
- All my betatesters.

Nhấn để mở rộng...

WAD Manager is an application that allows you to (un)install WAD packages

+----------------------------+
| WAD Manager v1.7 |
| developed by Waninkoko |
+----------------------------+
| www.teknoconsolas.es |
+----------------------------+

[ DISCLAIMER ]:
- THIS APPLICATION COMES WITH NO WARRANTY AT ALL, NEITHER EXPRESS NOR IMPLIED.
I DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE IN YOUR WII CONSOLE
BECAUSE OF A IMPROPER USAGE OF THIS SOFTWARE.

[ DESCRIPTION ]:
- WAD Manager is an application that allows the (un)installation of
packages in WAD format (homebrew and official packages).
It allows the browsing of a storage device to work with the
available WAD files in it.

[ SUPPORTED DEVICES ]:
- SDGecko.
- Internal SD slot (with SDHC support).
- USB device (1.1 and 2.0).

[ HOW TO USE ]:
1. Copy all the WAD packages in the storage device.
2. Insert the storage device in the Wii.
3. Run the application using any method to load homebrew.
4. Select the IOS version to use. IOS249 recommended (if available).
5. Select the storage device to use.
6. Browse the storage device contents and select the WAD package
to (un)install.

[ NOTES ]:
- To use the NAND emulation is necessary to have a COMPLETE copy
of the NAND filesystem in the root of the FAT device.

CHANGELOG
===========
- Directory browsing support added.
- USB 2.0 Mass Storage Device support fixed.
- Autofix bad common key (with fakesigning).
- GUI modified (bigger console and new background).
- Background music added (OGG player).
- Miscellaneous fixes and improvements.

Nhấn để mở rộng...