HƯỚNG DẪN SOFTMOD CÁC LOẠI MÁY WII
Tôi tình cờ mua cho 2 đứa con 1 máy Wii nhân chuyến đi công tác Nhật bản. Về nhà mới biết phải hack mới chơi được nhiều trò chơi khác, đơn giản là nếu muốn cũng không thể mua được game xịn để chơi. Tuy nhiên mang ra hàng thì thấy bảo không hack được ver mới 4.3 nếu không có một số game xịn nào đó. Bực mình tôi lục lọi trên mạng và đã hack được ngon lành chiếc máy của mình. Nhân tiện dịch ra đây hướng dẫn đã giúp tôi làm để mọi người tham khảo. Bài này trên wiihacks.com. Mật khẩu khi download các phần mềm là : www.wiihacks.com
CHÚ Ý : TÔI KHÔNG CHỊU TRÁCH NHIỆM VỚI BẤT CỨ VẤN ĐỀ GÌ SẢY RA VỚI MÁY CỦA CÁC BẠN KHI THỰC HIỆN THEO HƯỚNG DẪN NÀY.
Khuyến cáo : đọc kỹ các topic khác có liên quan để biết mình làm gì và sử lý được tình huống khi có sự cố.
Hướng dẫn này softmod tất cả các loại Wii : cũ, mới, nguyên bản, Nhật bản, Hàn quốc kể cả các loại hoa hòe hoa sói : màu đen, đỏ, xanh :rolleyes[1]:
Softmod có thể brick máy của bạn. Đó là điều rủi ro không mong muốn. Chấp nhận điều đó hoặc dừng lại ở đây, tùy bạn.
CHÚ Ý : một số điều khiển mới có thể không làm việc được với Homebrew Sofware mà chúng ta sử dụng để hack wii. Nếu bạn mua máy sau tháng 11/2011 thì có khả năng gặp điều khiển loại mới này. Tất cả các điều khiển loại cũ làm việc bình thường.
Danh sách điều khiển tương thích và không tương thích có tại đây : List of Working/Non-Working Wii Remotes Nếu điều khiển của bạn không tương thích hay mượn một cái cũ khác để hack.
CHÚ Ý : ĐỪNG BAO GIỜ UPDATE MÁY WII CỦA BẠN TỪ NINTENDO
CHƯƠNG 1 : CÀI HOMEBREW CHANNEL VÀ BOOTMII
Hãy đọc hướng dẫn ít nhất 3 lần trước khi làm.
Yêu cầu :
Có 350 NAND block còn trống
Tháo các điều khiển GC, GC card, USB driver
Đừng để mất nguồn điện
Cần 1 SD card 1-2 GB. Format SD card (FAT 32).
Phần 1: Cài Hackmii Installer
Khi chạy Hackmii 0.8, ios58 sẽ được cài cho tất cả các máy wii ver. 4.2 trở xuống. Dưới đây là rất nhiều phương pháp hack wii, hãy chọn phương pháp phù hợp cho máy của bạn.
(Phần hướng dẫn tiếng Anh ngại dịch vì ít thời gian, mod có thể biên tập lại)
1. Với Wii đã có Homebrew Channel
2. Với Wii ver 1.0 – 3.4 u/e/j/k
3. Với Wii ver 3.0 – 4.1 các loại (Bannerbomb v1)
4. Với Wii ver 4.0 - 4.2 các loại (Bannerbomb v2)
5. Với Wii ver 4.3 các loại (Letterbomb – không dùng đĩa game)
6. Với Wii ver 4.3 các loại (hack dùng đĩa game)
6.1. 4.3 u/e – Indianna PWNS
6.2. 4.3 u/e/j/k – Smash Stack
6.3. 4.3 u/e/j – YU-GI-OWNED! or YU-GI-VAH
6.4. 4.3 u/e/j – Lego Star Wars
6.5. 4.3 u/e/j – Bat HAXX
6.6. 4.3 u/e - Eric Hakawai – Tales of Symphonia
7. Một số phương pháp khác
(Còn tiếp)
Tôi tình cờ mua cho 2 đứa con 1 máy Wii nhân chuyến đi công tác Nhật bản. Về nhà mới biết phải hack mới chơi được nhiều trò chơi khác, đơn giản là nếu muốn cũng không thể mua được game xịn để chơi. Tuy nhiên mang ra hàng thì thấy bảo không hack được ver mới 4.3 nếu không có một số game xịn nào đó. Bực mình tôi lục lọi trên mạng và đã hack được ngon lành chiếc máy của mình. Nhân tiện dịch ra đây hướng dẫn đã giúp tôi làm để mọi người tham khảo. Bài này trên wiihacks.com. Mật khẩu khi download các phần mềm là : www.wiihacks.com
CHÚ Ý : TÔI KHÔNG CHỊU TRÁCH NHIỆM VỚI BẤT CỨ VẤN ĐỀ GÌ SẢY RA VỚI MÁY CỦA CÁC BẠN KHI THỰC HIỆN THEO HƯỚNG DẪN NÀY.
Khuyến cáo : đọc kỹ các topic khác có liên quan để biết mình làm gì và sử lý được tình huống khi có sự cố.
Hướng dẫn này softmod tất cả các loại Wii : cũ, mới, nguyên bản, Nhật bản, Hàn quốc kể cả các loại hoa hòe hoa sói : màu đen, đỏ, xanh :rolleyes[1]:
Softmod có thể brick máy của bạn. Đó là điều rủi ro không mong muốn. Chấp nhận điều đó hoặc dừng lại ở đây, tùy bạn.
CHÚ Ý : một số điều khiển mới có thể không làm việc được với Homebrew Sofware mà chúng ta sử dụng để hack wii. Nếu bạn mua máy sau tháng 11/2011 thì có khả năng gặp điều khiển loại mới này. Tất cả các điều khiển loại cũ làm việc bình thường.
Danh sách điều khiển tương thích và không tương thích có tại đây : List of Working/Non-Working Wii Remotes Nếu điều khiển của bạn không tương thích hay mượn một cái cũ khác để hack.
CHÚ Ý : ĐỪNG BAO GIỜ UPDATE MÁY WII CỦA BẠN TỪ NINTENDO
CHƯƠNG 1 : CÀI HOMEBREW CHANNEL VÀ BOOTMII
Hãy đọc hướng dẫn ít nhất 3 lần trước khi làm.
Yêu cầu :
Có 350 NAND block còn trống
Tháo các điều khiển GC, GC card, USB driver
Đừng để mất nguồn điện
Cần 1 SD card 1-2 GB. Format SD card (FAT 32).
Phần 1: Cài Hackmii Installer
Khi chạy Hackmii 0.8, ios58 sẽ được cài cho tất cả các máy wii ver. 4.2 trở xuống. Dưới đây là rất nhiều phương pháp hack wii, hãy chọn phương pháp phù hợp cho máy của bạn.
(Phần hướng dẫn tiếng Anh ngại dịch vì ít thời gian, mod có thể biên tập lại)
1. Với Wii đã có Homebrew Channel
If you already have a softmod with HBC installed, you can update your softmod with this guide.
Note: 4.3 wiis can skip installation of ios58 and 61, and simply load Hackmii from the HBC.
Backup and Format your sd-card
Extract MMM-58-61.zip to sd:\
Load the HomeBrew Channel
Launch Multi-Mod Manager -MMM will load
-Select Wad Manager -Press A
-Press 1, -press A -Install all wads
-IOS58 and IOS61 will install
-Press "any button"
-Press 2- load "App Manager"
-Select hackmii_installer_v0.8 -Press A
Hackmii Installer Loads
Note: 4.3 wiis can skip installation of ios58 and 61, and simply load Hackmii from the HBC.
Backup and Format your sd-card
Extract MMM-58-61.zip to sd:\
Load the HomeBrew Channel
Launch Multi-Mod Manager -MMM will load
-Select Wad Manager -Press A
-Press 1, -press A -Install all wads
-IOS58 and IOS61 will install
-Press "any button"
-Press 2- load "App Manager"
-Select hackmii_installer_v0.8 -Press A
Hackmii Installer Loads
Đơn giản nhất là update lên 4.3 sử dụng các phương pháp chính thức của Nintendo như update online hoặc dùng đĩa xịn.
Download MMM-58-61-Hackmii_0.8_BB1.zip, Extract file to sd:\
alternate BBv1 files-B, C, D, E- If the boot.dol does not load, try these, just extract to sd:\
-Go to wii settings- data managment- channels- SD- Load the boot.dol
-Multi-Mod Manager will load
-Select Wad Manager -Press A
-Press 1, -Press A -Install all Wads
-IOS58 and IOS61 will install
-Press "any button"
-Press 2- load "App Manager"
-Select hackmii_installer_v0.8 -Press A
Hackmii Installer Loads
alternate BBv1 files-B, C, D, E- If the boot.dol does not load, try these, just extract to sd:\
-Go to wii settings- data managment- channels- SD- Load the boot.dol
-Multi-Mod Manager will load
-Select Wad Manager -Press A
-Press 1, -Press A -Install all Wads
-IOS58 and IOS61 will install
-Press "any button"
-Press 2- load "App Manager"
-Select hackmii_installer_v0.8 -Press A
Hackmii Installer Loads
download MMM-58-61-Hackmii_0.8_BB2.zip, Extract file to sd:\
alternate Bannerbombv2 files-B, C- If the boot.dol does not load, try
these, just extract to sd:\
-Click the SD-ICON from the wii channel menu- load the boot.dol
-Multi-Mod Manager will load
-Select Wad Manager -Press A
-Press 1, -Press A -Install all wads
-IOS58 and IOS61 will install
-Press "any button"
-Press 2- load "App Manager"
-Select hackmii_installer_v0.8 -Press A
Hackmii Installer Loads
alternate Bannerbombv2 files-B, C- If the boot.dol does not load, try
these, just extract to sd:\
-Click the SD-ICON from the wii channel menu- load the boot.dol
-Multi-Mod Manager will load
-Select Wad Manager -Press A
-Press 1, -Press A -Install all wads
-IOS58 and IOS61 will install
-Press "any button"
-Press 2- load "App Manager"
-Select hackmii_installer_v0.8 -Press A
Hackmii Installer Loads
Go to the Letterbomb site HERE.
1. Get your Wii's mac address:The MAC address of the Wii can be found by:
From the Wii Channel menu, select "Wii Settings" (the round button on the bottom-left of the screen with "Wii"
on it)
Select "Internet," then "Console Settings."
The MAC address of the Wii console is displayed on the first line.
2. Format your SD card. Fat32
Panasonic SDFormat preferred. Dont skip this step.
3. Download the HackMii installer
You can use the mac address to build a custom hackmii installer at LetterBomb
MAKE SURE YOU SELECT YOUR REGION up top
If you get the captcha wrong, it will RESET your region. This happened to me. If you do, the installer, well,
in my case hung the wii. Had to hard boot it.
4. Copy downloaded files to root directory of SD card. I used windows xp.
5. Put card in wii and start it.
6. Hit the envelope in the lower right hand corner
If you dont see the red message with the bomb, hit the - or + buttons to choose a different date.
7. Click on the big red envelope with the bomb.
The hackmii installer launches. (note if it hangs, you might not have done step 2, or you might have chosen
the incorrect region)...
Hackmii loads
1. Get your Wii's mac address:The MAC address of the Wii can be found by:
From the Wii Channel menu, select "Wii Settings" (the round button on the bottom-left of the screen with "Wii"
on it)
Select "Internet," then "Console Settings."
The MAC address of the Wii console is displayed on the first line.
2. Format your SD card. Fat32
Panasonic SDFormat preferred. Dont skip this step.
3. Download the HackMii installer
You can use the mac address to build a custom hackmii installer at LetterBomb
MAKE SURE YOU SELECT YOUR REGION up top
If you get the captcha wrong, it will RESET your region. This happened to me. If you do, the installer, well,
in my case hung the wii. Had to hard boot it.
4. Copy downloaded files to root directory of SD card. I used windows xp.
5. Put card in wii and start it.
6. Hit the envelope in the lower right hand corner
If you dont see the red message with the bomb, hit the - or + buttons to choose a different date.
7. Click on the big red envelope with the bomb.
The hackmii installer launches. (note if it hangs, you might not have done step 2, or you might have chosen
the incorrect region)...
Hackmii loads
6.1. 4.3 u/e – Indianna PWNS
download Hackmii_0.8_IP_SS_BB2.zip, Extract to sd:\
Indiana PWNS - Works with 4.3u/e
-Play Lego Indiana Jones Original. Start a new game, then exit to System Menu.
-Go to wii settings, data management, save games, wii, SD
-Click SD, copy Indiana PWNS for your region
-Play Lego Indiana Jones original, load save game slot 1
When the game loads, you will be in Barnett College. Walk to theArt Room (through
the Courtyard), approach the left character on the podium. When it zooms on him, choose the switch
to option (two silhouettes, staggered, with an arrow pointing between them).
-Hackmii Installer Loads
Indiana PWNS - Works with 4.3u/e
-Play Lego Indiana Jones Original. Start a new game, then exit to System Menu.
-Go to wii settings, data management, save games, wii, SD
-Click SD, copy Indiana PWNS for your region
-Play Lego Indiana Jones original, load save game slot 1
When the game loads, you will be in Barnett College. Walk to theArt Room (through
the Courtyard), approach the left character on the podium. When it zooms on him, choose the switch
to option (two silhouettes, staggered, with an arrow pointing between them).
-Hackmii Installer Loads
Smash Stack - Works with 4.3u/j/e/k
-Requires "Super Smash Bros. Brawl" for your region
-download Smash Stack.zip ----
-extract to sd:\
-Load SSBB , with sd-card removed, make a save file if asked
-Go to the stage builder, delete all custom stages found, exit the stage builder
-Exit all the way back to the main SSBB menu
-Insert SD-CARD, Go back to the stage builder
-HackMii Installer loads
-Requires "Super Smash Bros. Brawl" for your region
-download Smash Stack.zip ----
-extract to sd:\
-Load SSBB , with sd-card removed, make a save file if asked
-Go to the stage builder, delete all custom stages found, exit the stage builder
-Exit all the way back to the main SSBB menu
-Insert SD-CARD, Go back to the stage builder
-HackMii Installer loads
6.3. 4.3 u/e/j – YU-GI-OWNED! or YU-GI-VAH
Works with 4.3u/e/j
You need YU-GI-OH 5D Wheelie Breaker game
4.3u wiis- download Hackmii_0.8-yu-gi-vah-U.zip, Extract to sd:\ -
4.3j wiis- download Hackmii_0.8_yu-gi-vah-J.zip, Extract to sd:\
4.3e wiis- download:
PAL 50hrz- Hackmii_0.8-yu-gi-OWNED!-E50.zip , Extract to sd:\
PAL 60hrz- Hackmii_0.8-yu-gi-OWNED!-E60.zip, Extract to sd:\
-Play YU-GI-OH 5D Wheelie Breaker at least once
-Go to Wii settings -> Data Management -> Savegames -> Wii
-Delete the Yu-Gi-Oh savegame
-Go to the Sd-card menu
-Copy the YU-GI-OH5D exploit to the wii
-Run the game YU-GI-OH 5D Wheelie Breaker and load the savegame file ...
-Hackmii installer 0.8 loads
You need YU-GI-OH 5D Wheelie Breaker game
4.3u wiis- download Hackmii_0.8-yu-gi-vah-U.zip, Extract to sd:\ -
4.3j wiis- download Hackmii_0.8_yu-gi-vah-J.zip, Extract to sd:\
4.3e wiis- download:
PAL 50hrz- Hackmii_0.8-yu-gi-OWNED!-E50.zip , Extract to sd:\
PAL 60hrz- Hackmii_0.8-yu-gi-OWNED!-E60.zip, Extract to sd:\
-Play YU-GI-OH 5D Wheelie Breaker at least once
-Go to Wii settings -> Data Management -> Savegames -> Wii
-Delete the Yu-Gi-Oh savegame
-Go to the Sd-card menu
-Copy the YU-GI-OH5D exploit to the wii
-Run the game YU-GI-OH 5D Wheelie Breaker and load the savegame file ...
-Hackmii installer 0.8 loads
Requires 1-2g SD card
Requires Lego Star Wars game
Play the game once
Return of Jodi- Download hackmii-0.8_return-jodi.zip
---
or
Jabba the Haxx -Download Hackmii-0.8_jabba-haxx.zip
-----
Extract to sd:\
Go to wii data managment, savegames
Delete your lego starwars save file (backup it up if you like)
Copy the hacked save file for your region from your sd card to your wii
Start up the game, load the first save slot (on the left, at 0.0%)
As soon as the level loads, run to the right and you'll see two characters floating. Run to the area in
front of them and you'll see "Return of Jodi" show up, press the "A" button on your Wiimote and your boot.elf
will run
Hackmii Installer 0.8 loads
Requires Lego Star Wars game
Play the game once
Return of Jodi- Download hackmii-0.8_return-jodi.zip
---
or
Jabba the Haxx -Download Hackmii-0.8_jabba-haxx.zip
-----
Extract to sd:\
Go to wii data managment, savegames
Delete your lego starwars save file (backup it up if you like)
Copy the hacked save file for your region from your sd card to your wii
Start up the game, load the first save slot (on the left, at 0.0%)
As soon as the level loads, run to the right and you'll see two characters floating. Run to the area in
front of them and you'll see "Return of Jodi" show up, press the "A" button on your Wiimote and your boot.elf
will run
Hackmii Installer 0.8 loads
Requires 1-2g SD card
Requires Lego Batman game
Play the game once
Download hackmii-0.8_bathaxx.zip
Extract to sd:\
Go to wii data managment, savegames
Delete your lego Batman save file (backup it up if you like)
Copy the hacked save file for your region from your sd card to your wii
Boot LEGO Batman and load the savegame you just copied. You are now in the batcave, take the elevator on
the right side. Then in the trophy room, go to the upper corner and go through the door in order to enter the
"Wayne Manor". Now you can select a character. Choose the last enabled one in the lowest row
Hackmii Installer 0.8 Loads
Requires Lego Batman game
Play the game once
Download hackmii-0.8_bathaxx.zip
Extract to sd:\
Go to wii data managment, savegames
Delete your lego Batman save file (backup it up if you like)
Copy the hacked save file for your region from your sd card to your wii
Boot LEGO Batman and load the savegame you just copied. You are now in the batcave, take the elevator on
the right side. Then in the trophy room, go to the upper corner and go through the door in order to enter the
"Wayne Manor". Now you can select a character. Choose the last enabled one in the lowest row
Hackmii Installer 0.8 Loads
Play "Tales of Symphonia: Dawn of
the New World" (RT4EAF).
Make a savegame
Download Free File Sharing Made Simple - MediaFire
Extract to sd:\
Go to wii settings -> data managment -> savegames -> wii
Delete your Tales of Symphonia savegame
Go to the sd card savegames ->Copy your exploit savegame to the wii. Then start the game, and load the save data.
Once the game starts ( and you see a retarded dog waving at you ), press PLUS to enter the game's menu.
Scroll down to "Status" and press A.
Then scroll down to the second character (named "Giantpune"). Highlite him, and press A.
Hopefully everything works out like it should and the boot.elf is loaded from your SD card.
Hackmii installer should load
the New World" (RT4EAF).
Make a savegame
Download Free File Sharing Made Simple - MediaFire
Extract to sd:\
Go to wii settings -> data managment -> savegames -> wii
Delete your Tales of Symphonia savegame
Go to the sd card savegames ->Copy your exploit savegame to the wii. Then start the game, and load the save data.
Once the game starts ( and you see a retarded dog waving at you ), press PLUS to enter the game's menu.
Scroll down to "Status" and press A.
Then scroll down to the second character (named "Giantpune"). Highlite him, and press A.
Hopefully everything works out like it should and the boot.elf is loaded from your SD card.
Hackmii installer should load
Boot2 Bootmii Option -
Only works for wiis with boot2 bootmii already installed
-Extract MMM-58-61_Hackmii_0.8_CB2.zip, to sd:\
-Boot the wii
-Multi-Mod Manager will load
-Select Wad Manager -Press A
-Press 1, -Press A -Install all wads
-IOS58 and IOS61 will install
-Press "any button"
-Press 2- load "App Manager"
-Select hackmii_installer_v0.8 -Press A
Hackmii Installer Loads
Installed Forwarder Channel Option-
If you have a forwarder channel installed, say for neogamma, or mplayer, or other
-Extract MMM-58-61_Hackmii_0.8_CB2.zip to sd:\
Replace the sd:\apps\(forwarder app dir)\boot.dol with the sd:\boot.dol
Launch the forwarder Channel
-Multi-Mod Manager will load
-Select Wad Manager -Press A
-Press 1, -Press A -Install all wads
-IOS58 and IOS61 will install
-Press "any button"
-Press 2- load "App Manager"
-Select hackmii_installer_v0.8 -Press A
Hackmii Installer Loads
Cioscorp/Darkcorp installed
If you had Cioscorp/Darkcorp installed prior to a system update
You can load a fakesigned disc via disc swap or possibly the disc channel
-Pick a game that reloads the health/safety screen when rebooted
-Pick a game that runs on a cios installed by cioscorp/darkcorp
-Rip/get a 1:1 iso of this game to your pc
-Example "Castlevania Judgment" which runs on ios36
Extract ios-tools.zip to the location of your game iso
-Extract MMM-58-61-Hackmii_0.8_BB2.zip, to sd:\
-copy sd:\apps\mmm\boot.dol to the location of your game iso
-Run MakeKeyBin.exe, type 42, click generate and exit
-Run WIIScrubber.exe
Click load ISO, select your game iso
Double click Partition 1- data
Right click on main.dol,
Click replace
Select boot.dol
main.dol name will not change
Exit
-Burn the patched game iso, burn it good and proper
You may be able to load this from the disc channel if you have a current version of darkcorp installed-try
If the patched game iso does not load, do the following-
Load your retail game from the disc channel
Once the game loads press [HOME] on the wiimote
Press eject and remove the retail game, insert the patched game disc
Press restart
Multi-Mod Manager loads
-Select Wad Manager -Press A
-Press 1, -Press A -Install all wads
-IOS58 and IOS61 will install
-Press "any button"
-Press 2- load "App Manager"
-Select hackmii_installer_v0.8 -Press A
Hackmii Installer Loads
……
Vài trường hợp nữa nhưng chắc không cần đến.
Only works for wiis with boot2 bootmii already installed
-Extract MMM-58-61_Hackmii_0.8_CB2.zip, to sd:\
-Boot the wii
-Multi-Mod Manager will load
-Select Wad Manager -Press A
-Press 1, -Press A -Install all wads
-IOS58 and IOS61 will install
-Press "any button"
-Press 2- load "App Manager"
-Select hackmii_installer_v0.8 -Press A
Hackmii Installer Loads
Installed Forwarder Channel Option-
If you have a forwarder channel installed, say for neogamma, or mplayer, or other
-Extract MMM-58-61_Hackmii_0.8_CB2.zip to sd:\
Replace the sd:\apps\(forwarder app dir)\boot.dol with the sd:\boot.dol
Launch the forwarder Channel
-Multi-Mod Manager will load
-Select Wad Manager -Press A
-Press 1, -Press A -Install all wads
-IOS58 and IOS61 will install
-Press "any button"
-Press 2- load "App Manager"
-Select hackmii_installer_v0.8 -Press A
Hackmii Installer Loads
Cioscorp/Darkcorp installed
If you had Cioscorp/Darkcorp installed prior to a system update
You can load a fakesigned disc via disc swap or possibly the disc channel
-Pick a game that reloads the health/safety screen when rebooted
-Pick a game that runs on a cios installed by cioscorp/darkcorp
-Rip/get a 1:1 iso of this game to your pc
-Example "Castlevania Judgment" which runs on ios36
Extract ios-tools.zip to the location of your game iso
-Extract MMM-58-61-Hackmii_0.8_BB2.zip, to sd:\
-copy sd:\apps\mmm\boot.dol to the location of your game iso
-Run MakeKeyBin.exe, type 42, click generate and exit
-Run WIIScrubber.exe
Click load ISO, select your game iso
Double click Partition 1- data
Right click on main.dol,
Click replace
Select boot.dol
main.dol name will not change
Exit
-Burn the patched game iso, burn it good and proper
You may be able to load this from the disc channel if you have a current version of darkcorp installed-try
If the patched game iso does not load, do the following-
Load your retail game from the disc channel
Once the game loads press [HOME] on the wiimote
Press eject and remove the retail game, insert the patched game disc
Press restart
Multi-Mod Manager loads
-Select Wad Manager -Press A
-Press 1, -Press A -Install all wads
-IOS58 and IOS61 will install
-Press "any button"
-Press 2- load "App Manager"
-Select hackmii_installer_v0.8 -Press A
Hackmii Installer Loads
……
Vài trường hợp nữa nhưng chắc không cần đến.
(Còn tiếp)